Mix Types

FC 9.5 - specified at 1"

• This mix would apply to parking lot mixes and low speed roadways.

FC 12.5 - specified at 1 ½" to 2

• These mixes would apply to a roadway with a design speed of 35 mph or greater.

FC-5 - specified at ¾" of an inch

• This mix would be for a multi-lane or limited access roadway with design speeds of 55 mph or greater.

With the exception of FC-5, all of our ready to produce mixes contain recycled asphalt

‍

SP 19.0mm

• This is a structural mix that is specified for lower lifts where plans may call for multiple lifts of asphalt, normally where 5″ to 7″ total depth of asphalt is required. This mix is for bottom lift applications only where extremely heavy constant traffic loads will be present, such as, interstates or shipping ports.
  ‍

SP 12.5mm

• This is a structural mix that is specified in different traffic load applications depending on amount and types of traffic. In heavier traffic loads situations, this mix has an abundance of ½” stone and has a very “rocky” appearance. This is the most commonly used structural mix where plans call for a “heavy duty” application, such as truck docks with high traffic count entrances, exits, and stop & start traffic movements. This mix is specified to be placed in 1 ½” to 2 ½” depth per lift.

SP 9.5mm

• This is a structural mix typically used in parking lots and residential roadways. This mixture has a smoother appearance than the SP 12.5. This mix is specified to be placed in 1″ to 1 ½” depth per lift.
  ‍

EZ STREET is a polymer-modified, high-performance cold asphalt. Guaranteed to permanently repair potholes, utility cuts, overlays, and edge repairs in asphalt or concrete. EZ STREET asphalt works in ALL weather conditions, it even works in water. EZ STREET asphalt is a quick, effective, and permanent do-it-yourself asphalt repair. It is available in 50lbs bags and bulk.